数据前推测试案例

Src/id.v

@@ -5,6 +5,12 @@ module id(input wire rst,
           input wire[`InstBus] inst_i,
           input wire[`RegBus] reg1_data_i,
           input wire[`RegBus] reg2_data_i,
+          input wire ex_wreg_i,                //EX
+          input wire[`RegBus] ex_wdata_i,
+          input wire[`RegAddrBus] ex_wd_i,
+          input wire mem_wreg_i,               //MEM
+          input wire[`RegBus] mem_wdata_i,
+          input wire[`RegAddrBus] mem_wd_i,
           output reg reg1_read_o,
           output reg reg2_read_o,
           output reg[`RegAddrBus] reg1_addr_o,
@@ -64,6 +70,10 @@ module id(input wire rst,
     always @ (*) begin
         if (rst == `RstEnable) begin
             reg1_o <= `ZeroWord;
+            end else if ((reg1_read_o == 1'b1)&&(ex_wreg_i == 1'b1)&&(ex_wd_i == reg1_addr_o)) begin
+            reg1_o <= ex_wdata_i;
+            end else if ((reg1_read_o == 1b'1)&&(mem_wreg_i == 1b'1)&&(mem_wd_i == reg1_addr_o)) begin
+            reg1_o <= mem_wdata_i;
             end else if (reg1_read_o == 1'b1) begin
             reg1_o <= reg1_data_i;
             end else if (reg1_read_o == 1'b0) begin
@@ -76,6 +86,10 @@ module id(input wire rst,
     always @ (*) begin
         if (rst == `RstEnable) begin
             reg2_o <= `ZeroWord;
+            end else if ((reg2_read_o == 1'b1)&&(ex_wreg_i == 1'b1)&&(ex_wd_i == reg2_addr_o)) begin
+            reg2_o <= ex_wdata_i;
+            end else if ((reg2_read_o == 1b'1)&&(mem_wreg_i == 1b'1)&&(mem_wd_i == reg2_addr_o)) begin
+            reg2_o <= mem_wdata_i;
             end else if (reg2_read_o == 1'b1) begin
             reg2_o <= reg2_data_i;
             end else if (reg2_read_o == 1'b0) begin

Src/yunmips.v

@@ -73,6 +73,14 @@ module yunmips(input wire clk,
     
     .reg1_data_i(reg1_data),
     .reg2_data_i(reg2_data),
+
+    .ex_wreg_i(ex_wreg_o),                //EX
+    .ex_wdata_i(ex_wdata_o),
+    .ex_wd_i(ex_wd_o),
+
+    .mem_wreg_i(mem_wreg_o),               //MEM
+    .mem_wdata_i(mem_wdata_o),
+    .mem_wd_i(mem_wd_o),
     
     .reg1_read_o(reg1_read),
     .reg2_read_o(reg2_read),